Service charges
$0.7/sq ft up
Area-based tiers apply, with minimum charges from $1,000. The $0.7/sq.ft. rate applies to 7,000–8,000 sq.ft., with a $5,600 minimum for that tier. Over 8,000 sq.ft. requires an individual quote. Special materials, severe stains and optional back-side cleaning are quoted separately; please mention back-side cleaning when booking.
Full price listSuitable to handle
- Machine-made synthetic carpet
- Blended carpet
- Long and short pile carpet
- Children's play mat carpet
- Doorway and hallway mats
Suitability still needs to be confirmed according to the actual object, material, and site conditions; if in doubt, you can send photos to inquire first.
Preparation before quote
- 1
Photograph the carpet in full and its material
Provide full view, edges, label, and back photos; specify if it is a movable carpet or wall-to-wall carpet to facilitate identification of suitable treatment methods.
- 2
Provide dimensions and stain details
Measure the length and width or cleaning area, take close-ups of major stains, and specify when they appeared and what cleaning products were used. If you need the back cleaned, please state this separately.
- 3
Explain furniture and usage arrangements
Take photos of surrounding furniture and passageways; provide the full address, floor, and the time you wish to use the rug; discuss operations and drying space during booking.
Cleaning steps
- 1
Vacuum and fluff
First vacuum dry dust and debris on the carpet, and brush/loosen carpet fibers.
- 2
Stain detection
Check the stain location and condition to identify the areas requiring spot treatment.
- 3
Local gentle brushing
Use neutral carpet cleaner, combined with a soft brush to treat stain spots, adjust intensity according to material.
- 4
Spray extraction cleaning
Use Kärcher spray-extraction cleaning machines to clean carpets suitable for wet cleaning, while extracting sewage at the same time.
- 5
Backing cleaning (extra charge if needed)
If you need to clean the back, confirm the arrangement and additional fees first, then flip the carpet to repeat the cleaning steps; it is not included in every service.
- 6
Extract sewage
Use wet/dry vacuum cleaner to suck up sewage and excess water; drying time is still required after cleaning.
Drying and usage precautions
Drying speed is affected by carpet thickness, material, weather, and ventilation, and cannot be promised as a fixed number of hours based on the region. Follow the technician's advice for ventilation and use fans, and resume use only after confirming it is fully dry.
- Please clear small furniture and miscellaneous items off the carpet before cleaning
- Actual effect depends on the age of the stain and material; old stains may not be completely removable.
- Drying time is affected by weather, ventilation, and carpet thickness
- Carpet back cleaning is an optional item, requires separate fees; please state the need for back handling when booking.
Kwun Tong・Understand before booking
Kwun TongEntry preparation and district conditions
For home carpets in Lam Tin, Yau Tong, or other areas, provide dimensions, major stains, and furniture placement first; if the items are located in an industrial/commercial unit, please also explain the on-site usage and management office access requirements.
- 1
Commercial properties check entry requirements first
For industrial or commercial buildings in Kwun Tong and Kowloon Bay, please first confirm equipment loading/unloading, goods lift usage, construction registration, and available work hours with the management office; actual requirements are subject to the specific building.
- 2
Accommodate venue's original use
For home venues in Lam Tin, Yau Tong, etc., please reserve space around the items; for industrial/commercial units, please explain operating and foot traffic arrangements. Service is assessed based on actual items and is not assumed to be applicable based on property type.
- 3
Clear paths and work areas first
Put away small items and fragile goods before cleaning; point out office equipment or exhibits that need protection. For moving large furniture and zoning construction, please provide layout photos to discuss first.
- 4
Reserve time for drying and suspension of use
Please provide ventilation conditions and preferred reuse time. For venues needing to maintain operations, discuss cleaning scope and traffic lines first; do not assume immediate full opening after completion.
FAQ
Which areas in Kwun Tong District can make inquiries?
You can inquire about Kwun Tong, Kowloon Bay, Lam Tin, and Yau Tong. Please provide full address, floor, and item details; confirm on-site arrangements when booking. Properties not listed in the directory can also be inquired.
How to confirm home carpet cleaning charges in Kwun Tong District?
From $0.7/sq.ft. Area-based tiers apply, with minimum charges from $1,000. The $0.7 rate applies to 7,000–8,000 sq.ft., with a $5,600 minimum for that tier. Over 8,000 sq.ft. requires an individual quote. Special materials, severe stains and optional back-side cleaning are quoted separately. Please provide the address and access requirements; the scope and quote will be confirmed when booking.
How long does on-site cleaning take?
General standard-sized carpet cleaning takes about 1–2 hours; larger areas, more stains, or complex processes may take longer. Completion of work does not mean it is fully dry; usage time must still be arranged according to material, thickness, and ventilation conditions.
Can it be used same day?
Depends on the drying situation. The technician will give you recommendations based on the humidity and ventilation on the day.
Is carpet backing cleaning included?
Carpet back cleaning is an optional item, requires separate fees; please state the need for back handling when booking.
What is the difference in booking information for residential, industrial, or commercial buildings?
For industrial or commercial buildings in Kwun Tong and Kowloon Bay, please check with the building management first regarding equipment access, cargo elevator usage, work registration, and available working hours; actual requirements are subject to the building's policy. Whether the service is suitable still depends on actual items, materials, and on-site conditions.